Rider Responsibility & Safety Acknowledgment

All riders must read and understand their user manual before their first ride. Any additional components may have separate user manuals which must also be read and understood before use.

I understand that all E-Moto products are for use on private property ONLY, and in purchasing take full responsibility of using these products within the confines of my state's law.

Failing to comply with the state laws in which I reside could result in, but are not limited to, fines, prosecution resulting in a criminal record, prison sentence, death and other liabilities such as injuries to others. As these are an unregistrable, uninsured vehicle, your state's laws will outline the use of these vehicles.

If, in the event, a road registerable product has been purchased, it is the responsibility of the purchaser to ensure the registration is organised and paid for via their governing body in accordance with their state laws.

• It is the owner's and rider's responsibility to familiarise and practice using the product and all of its features.
• It is the rider's responsibility to ensure proper protective equipment, including a helmet, is worn and inspected regularly for any wear or defects. Failure to wear a helmet when riding may result in serious injury or death in the event of an accident.
• Ensure correct tightening and setup is performed on the product after assembly.
• It is the responsibility of the owner and rider to familiarize themselves with the e-bike laws and requirements of operation of this product in the area(s) where they ride.
• Ensure that the product is free from damage, otherwise you could lose control and fall.
• Off-road riding requires close attention and specific skills and presents variable conditions and hazards which accompany the conditions. Wear appropriate safety gear and do not ride alone in remote areas.
• Bicycles and bicycle parts have strength and integrity limitations and extreme riding should not be performed or you risk damaging the components or becoming seriously injured.
• After any incident, accident or occurrence you must consider your bike unsafe to ride until an inspection is made according to the safety check provided in the user manual. Consult with a professional mechanic for a comprehensive inspection.
• Failure to properly charge, store, or use your battery will void the warranty and may cause a hazardous situation.
• Your battery, and therefore your eMoto product, should always be stored at room temperature. Excessive heat can permanently affect or damage the battery. If left in a hot car, hot environment or exposed to other factors that may cause excessive heat, your battery may be affected.
• Cold temperatures will affect battery life and power output. If you are riding in low temperatures you may experience lower range, top speed and acceleration. Exposing the battery to excessively low temperatures may have a permanent effect or cause damage.
• We recommend removing all eMoto products from charge once the charger shows charging has completed.
• If you will not be using your battery for a prolonged period of 3 MONTHS OR MORE, it is recommended to STORE IT BETWEEN 40 AND 50%. Leaving it fully charged and unused can result in battery failure or permanent loss of total capacity. If the battery is stored near depleted for a prolonged period it may drop to an unrecoverable voltage. Never leave your eMoto product plugged into the charger for extended periods of time.
• We recommend you only charge eMoto products under adult supervision and never leave it on charge overnight, as standard practice.
• Any after-market changes to your eMoto product not expressly approved by iScoot may void the warranty and create an unsafe riding experience.
• Parental supervision is required at all times for riders under the age of 18.

All riders must read and understand their user manual before their first ride. Any additional components may have separate user manuals which must also be read and understood before use.

I understand that all e-scooter products must be used in accordance with my state's laws and regulations. In purchasing this product, I take full responsibility for ensuring compliance with the legal requirements and usage restrictions applicable in my state or territory.

Failing to comply with state laws could result in, but is not limited to, fines, prosecution, a criminal record, injury, death, and liabilities for damages caused to others. Australian states and territories have specific regulations regarding e-scooter power limits, speed restrictions, and permissible riding areas. It is my responsibility to ensure my e-scooter complies with these laws.

It is the owner’s and rider’s responsibility to familiarise themselves with the product, its features, and its proper operation.

• It is the rider’s responsibility to ensure proper protective equipment, including a helmet, is worn and inspected regularly for any wear or defects. Failure to wear a helmet when required by law may result in serious injury or death in the event of an accident.
• Ensure correct tightening and setup is performed on the product after assembly.
• It is the responsibility of the owner and rider to familiarise themselves with the e-scooter laws and operational requirements in the areas where they ride.
• Ensure that the product is free from damage before riding, as damage may lead to loss of control and potential injury.
• Riding an e-scooter requires close attention, specific skills, and awareness of variable conditions and hazards. Always wear appropriate safety gear and avoid riding alone in remote areas.
• E-scooters and their components have strength and integrity limitations. Extreme riding, modifications, or improper use may damage components or cause serious injury.
• After any incident, accident, or occurrence, the e-scooter should be considered unsafe to ride until a full inspection is conducted according to the safety check provided in the user manual. Consult a professional mechanic for a comprehensive inspection.

Failure to properly charge, store, or use your battery may void the warranty and create a hazardous situation.

Your battery should always be stored at room temperature. Excessive heat can permanently affect or damage the battery. Exposure to high temperatures, such as being left in a hot car or environment, may impact battery performance.

Cold temperatures can affect battery life and power output. Riders in low temperatures may experience reduced range, top speed, and acceleration. Exposing the battery to extremely low temperatures for extended periods may cause permanent damage. If the battery will not be used for a prolonged period (3 MONTHS OR MORE), it should be stored at 40-50% charge. Leaving a battery fully charged or near depleted for an extended time can result in permanent capacity loss or failure. Never leave the e-scooter plugged into the charger for extended periods.

We recommend charging e-scooter batteries under adult supervision and never leaving them charging overnight.

Any aftermarket modifications to your e-scooter that are not expressly approved by iScoot may void the warranty and create an unsafe riding experience.

Parental supervision is required at all times for riders under the age of 18.

Speed Restrictions and Unlocking Information

All e-scooters are shipped with a speed restriction of 25km/h in compliance with Australian laws. If the customer wishes to unlock the scooter for use on private property, information can be provided upon request. It is the customer's responsibility to ensure the scooter is used legally and safely in accordance with local regulations.

All riders must read and understand their user manual before their first ride. Any additional components may have separate user manuals which must also be read and understood before use.

I understand that all e-bike products must be used in accordance with my state's laws and regulations. In purchasing this product, I take full responsibility for ensuring compliance with the legal requirements and usage restrictions applicable in my state or territory.

Failing to comply with state laws could result in, but is not limited to, fines, prosecution, a criminal record, injury, death, and liabilities for damages caused to others. Australian states and territories have specific regulations regarding e-bike power limits, speed restrictions, and permissible riding areas. It is my responsibility to ensure my e-bike complies with these laws.

It is the owner’s and rider’s responsibility to familiarise themselves with the product, its features, and its proper operation.

• It is the owner’s and rider’s responsibility to ensure proper protective equipment, including a helmet, is worn and inspected regularly for any wear or defects. Failure to wear a helmet may result in serious injury or death in the event of an accident.
• Ensure correct tightening and setup is performed on the product after assembly.
• It is the responsibility of the owner and rider to familiarise themselves with the e-bike laws and operational requirements in the areas where they ride.
• Ensure that the product is free from damage before riding, as damage may lead to loss of control and potential injury.
• Off-road riding requires close attention, specific skills, and awareness of variable conditions and hazards. Always wear appropriate safety gear and avoid riding alone in remote areas.
• Bicycles and bicycle components have strength and integrity limitations. Extreme riding, modifications, or improper use may damage components or cause serious injury.
• After any incident, accident, or occurrence, the e-bike should be considered unsafe to ride until a full inspection is conducted. Consult a professional mechanic for a comprehensive inspection.

Failure to properly charge, store, or use your battery may void the warranty and create a hazardous situation.

Your battery should always be stored at room temperature. Excessive heat can permanently affect or damage the battery. Exposure to high temperatures, such as being left in a hot car or environment, may impact battery performance.

Cold temperatures can affect battery life and power output. Riders in low temperatures may experience reduced range, top speed, and acceleration. Exposing the battery to extremely low temperatures for extended periods may cause permanent damage. If the battery will not be used for a prolonged period (3 MONTHS OR MORE), it should be stored at 40-50% charge. Leaving a battery fully charged or near depleted for an extended time can result in permanent capacity loss or failure. Never leave the e-bike plugged into the charger for extended periods.

We recommend charging e-bike batteries under adult supervision and never leaving them charging overnight.

Any aftermarket modifications to your e-bike that are not expressly approved by iScoot may void the warranty and create an unsafe riding experience.

Parental supervision is required at all times for riders under the age of 18.

Speed Restrictions and Unlocking Information

All e-bikes are shipped with a speed restriction of 25km/h in compliance with Australian laws. If the customer wishes to unlock the ebike for use on private property, information can be provided upon request. It is the customer's responsibility to ensure the scooter is used legally and safely in accordance with local regulations.